| 摘要: |
| 为了满足6G的低延迟需求,采用多路延迟负反馈(Multi-path Delay Feedback,MDF)架构设计了快速傅里叶变换(Fast Fourier Transform,FFT)处理器。提出改良基211算法减少用于旋转因子的常数值总量,从而有效减少了只读存储器(Read-only Memory,ROM)的尺寸。为进一步最小化硬件成本,提出了一种正则有符号位(Canonical Signed Digit,CSD)复数乘法器共享方案用于多路径FFT处理器的实现。使用Stratix V 现场可编程门阵列(Field Programmable Gate Array,FPGA)实现设计,综合结果显示该设计方案能够有效控制硬件成本。工作频率为350 MHz时,数据吞吐量达到了31.3 sample/cycle,延迟仅为0.37 μs。 |
| 关键词: 6G物理层 快速傅里叶变换器 多路径延迟负反馈架构 基2k算法 共享CSD乘法器 |
| DOI:10.20079/j.issn.1001-893x.250317003 |
|
| 基金项目:河北省中央引导地方科技专项(246Z0203G);承德市应用技术研究与开发暨可持续发展议程创新示范区专项计划(202305B092) |
|
| Design of Low-latency and Low Hardware-cost 4096-point FFT for 6G |
| YU Jiana,JI Jiaqib,FAN Haoyanga,LI Sinan |
| (1a.Physics and Electronic Engineering College;1b.Mathematics and Computer Science College,Hebei Minzu Normal University,Chengde 067000,China;2.Biomedical Engineering College,Chengde Medical University,Chengde 067000,China) |
| Abstract: |
| To meet the low-latency requirements of 6G,a fast Fourier transform(FFT) processor is designed by adopting the multi-path delay feedback(MDF) architecture.In order to reduce the total number of constant values of twiddle factors,a modified radix-211 FFT algorithm is proposed,thereby efficiently reducing the size of read-only memory(ROM).A sharing canonical signed digit(CSD) complex multiplier scheme for multi-path FFT architecture is proposed,which can minimize the hardware cost further.This design has been implemented on Stratix V field programmable gate array(FPGA).Compilation report shows that the proposed scheme achieves more efficient hardware resource utilization,and it has a latency of 0.37 μs and throughput of 313 samples/cycle when the operating clock frequency is 350 MHz. |
| Key words: 6G physical layer FFT processor multi-path delay feedback architecture radix-2k algorithm sharing CSD multipliers |