| 摘要: |
| 针对目前多种通信模式的共存和发展趋势，对传统DDC结构进行改进，以适用于多模系统。提出了多模数字下变频改进结构与参数设计，完成了各模块Verilog代码编写和Modelsim仿真，并对Modelsim仿真结果进行分析和验证，验证了改进数字下变频的可行性；最后将代码移植到FPGA，并结合ETTUS射频板、自主设计的中频板以及友晶TR4 FPGA开发板多模硬件平台进行了板级调试，验证了多模功能的可行性，充分证明该结构能兼容WCDMA和TD-LTE两种模式，具有较高的实用性和通用性。 |
| 关键词: 软件无线电 多模终端 数字下变频 现场可编程门阵列 中频 |
| DOI： |
|
| 基金项目:国家自然科学基金资助项目（61301126）；重庆市基础与前沿研究计划项目（cstc2013jcyjA40041）；重庆邮电大学博士启动基金（A2012-33）；重庆邮电大学青年科学研究项目（A2012-77） |
|
| An improved multimode digital down converter structure and its FPGA implementation |
| ZHANG Ting-wei,YUAN Zheng-wu,ZHOU Mu,TIAN Zeng-shan |
| () |
| Abstract: |
| According to the coexistence of various communication modes and the development trend, the traditional DDC(Digital Down Converter) structure is modified to apply to the multimode system.The improved construction and parameter design of multimode DDC are proposed, the Verilog coding and Modelsim simulation is completed,and results are analyzed and validated. Finally,code is transplanted into FPGA,and based on the board debugging on the ETTUS RF board,IF board designed independently and Terasic TR4 FPGA board,the feasibility of multimode functionality has been verified.It has been fully proved that this structure can be compatible with two modes(WCDMA and TD-LTE) and has high practicality and generality. |
| Key words: software radio multimode terminal digital down converter field programmable gate array intermediate frequency |
《电讯技术》编辑部 