| 引用本文： |
-
康德永,傅敏辉,赵文华,等.基于恒星测量的船载雷达轴系误差修正参数动态标定[J].电讯技术，2013，53（7）：0 - . [点击复制]
- KANG De-yong,FU Min-hui,ZHAO Wen-hua,et al.Dynamic calibration for shaft parameters of ship-borne radiometer equipment based on star observation[J].，2013，53（7）：0 - . [点击复制]
|
|
| 摘要: |
| 提出了一种动态条件下通过船载经纬仪和雷达标校电视联合测恒星，标定雷达轴系
误差修正参数的数学方法，从理论上推导了相关的模型。在此基础上，通过实测数据进行了
试算分析。分析结果表明：利用动态标定方法给出的船载无线电雷达轴系误差修正参数吸
收了经纬仪光轴和雷达光轴之间的偏差，有效提高了雷达测角精度。 |
| 关键词: 船载雷达 轴系参数 动态标定 |
| DOI：10.3969/j.issn.1001-893x.2013.07.024 |
|
| 基金项目: |
|
| Dynamic calibration for shaft parameters of ship-borne radiometer equipment based on star observation |
| KANG De-yong,FU Min-hui,ZHAO Wen-hua,YANG Lei,LI Yu-jian |
| () |
| Abstract: |
| A new parameter-correction technique is proposed, which can calibrate the radio
meter shaft parameters by means of radar-theodolite joint star observati
on.The related model is derived and linked with practice.By using t
his technique,the related task data is analyzed. The results indicate that the
ship-borne radio shaft parameters corrected by the dynamic calibration can elim
inate the error between the radio optical axis and theodolite optical axis. The technique
can obviously improve the measurement accuracy of the ship-borne radio system. |
| Key words: ship-borne radar shaft parameter dynamic calibration |
《电讯技术》编辑部 