摘要: |
为满足部队和大修厂对航空无线电近距导航系统的检测需求,设计了以PC104嵌入式计
算机为核心的自动检测仪硬件与软件程序,详细阐述了主要功能模块的工作原理。采
用高精度的恒温晶振源,通过延时电路模拟地面信标产生方位、距离模拟信号以检测机载设
备的导航精度及抗噪性能,其检测精度达到001PPM。 |
关键词: 机载设备 近距导航 检测仪 方位模拟 距离模拟 |
DOI:10.3969/j.issn.1001-893X. |
|
基金项目: |
|
Design and Realization of Check UP Equipment of an Airborne Short Rang Navigation System |
MA Er-tao,LI Jian-hai,LIU Bao-hua,WANG Ping |
(The Engineering Institute, Air Force Engineering University, Xi′an 710038, Chi
na) |
Abstract: |
To meet the checking requirement of aviation radio ShortRangNavigation s
ystem in military and overhaul works,the hardw
are and software of checkup equipment are designed based on PC104 embedded com
puter, and the functions of major parts are illustrated in detail. The co
nsta
nt temperature oscillator source is adopted and the orientation and distance sig
nals are generated through the way of delayed circuit simulating ground radio b
eaconing to detect the navigation p
recision and resistance performance to noise. The detection precision can reac
h 0.01PPM. |
Key words: airborne equipment short rang navigation check up equipment orientation simulation distance simulation |