摘要: |
为了快速准确地设计并制作恒带宽窄带集总跳频滤波器,提出了一种随频率变化而
变化的负载结构。通过对这种结构模型的分析,得到了其关于频率和相对带宽的精确变换公
式,利用麦夸特优化法对其进行优化计算,快速得到该负载结构各部件的最优值。最后利用
该方法设计并制作了一个二阶集总带通滤波器。实验结果表明,该方法实现滤波器比传统
手调快几倍,该滤波器在跳频范围30~90 MHz内保持相对恒带宽598%~689%,回波
损耗小于-19 dB,插损大于-2.2 dB。 |
关键词: 相对恒带宽 窄带集总跳频滤波器 负载结构 麦夸特优化法 |
DOI: |
|
基金项目: |
|
Theoretical Calculation and Implementation of a Lumped Constant Bandwidth Frequency hopping Narrowband Filter |
ZHOU Chang,TANG Qing-hua,ZHAN La-min |
(Institute of Microwave Technology and Application,Department of Electronics,
Huazhong University of Science and Technology,Wuhan 430074,China) |
Abstract: |
For fast and accurate design and production of lumped constant bandwid
th frequency-hopping(FH) narrowband filter, a load structure changing with frequ
ency
is introduced.Through analysis of this model, the exact frequency
and relative bandwidth transformation formula is derived.With Levenberg-Marqua
rdt method
the optimal values of the components in the load structure are obtained quickly
.Finally,by using
the method a 2-order lumped band-pass filter(BPF) is designed and developed.The
test res
ults show that the realization of the filter is several times faster than that o
f tradition
al manually-tuned filter,and over the 30~90 MHz hopping range,
the filter maintains a relatively constant bandwidth of 5.98%~6.89%, return lo
ss<-19 dB, insertion loss>-2.2 dB. |
Key words: lumped constant bandwidth frequency-hopping narrowband filter load structure Levenberg-Marquardt method |